20 mm protective rubber mat

BUILDING PROTECTION MAT 20MM

The building protection mat 20 mm (made of rubber granulate) is used for protection and sealing on terraces and balconies as well as in pond construction. However, it is also used as sound insulation and vibration dampening and can be used in fitness studios as fall protection and as an anti-slip mat in stationary applications. In our shop you can buy the 20 mm building protection mat cheaply and online.

Laying the 20 mm building protection mat

Sealing of terraces is carried out with the building protection mat of 20 mm. All types of terraces, such as roof terraces, wooden terraces and balconies, are sealed against rain with PVC films, welded membranes or EPDM films. The sealing mentioned is the most sensitive layer of the entire structure because the damage can only be repaired if layers above it, such as: plate bearings, pedestals and terrace slabs or the substructure and the floorboards on a wooden terrace) have been removed. The 20 mm building protection mat protects primarily against damage from above and distributes point loads (e.g. in slab bearings or pedestals). Mat thickness is 20 mm.

Protection for sealing when building a pond (e.g. a garden pond or a swimming pool)

When building ponds, PVC films and EPDM films in particular are used as sealing. The substrate is varied when building a pond. Sand alternates with stones and clay. Building rubble and tree roots could damage the foils used below (with water pressure from above). Water with a volume of 1 cubic meter presses these films with exactly 1000 kilos per square meter. If the surface is not homogeneous, a film is stretched enormously and its ability to tear is stressed. Therefore, protecting these films against damage from below is very important and necessary. In many cases, the protective fleece with a thickness of 20 mm is used. With heavy use and greater water depth, thick building protection mats are required. Only this building protection mat is used on the top of the sealing film.

Building protection mat – anti-slip mat for stationary use

The 20 mm building protection mat can also be used as slip protection for large electrical appliances such as washing machines and dryers and for floors. The 20 mm building protection mat is unsuitable as an anti-slip mat on vehicles because it has to withstand high demands on tear resistance, sliding friction and elongation at break due to heavy use due to weight, acceleration and deceleration. Anti-slip mats must meet the requirements of VDI 2700 when transporting goods.

Building protection mat 20 mm – floor protection against damage

Rooms in which heavy objects can fall but do not want to damage the floor are also fitted with 20 mm building protection mats. It is e.g. B. Possible in fitness studios or on sports boats.

Building protection mat 20 mm as vibration and vibration dampening

The user has to try it out. Only a vibration expert can calculate exact damping values for you.

Can you cut the 20 mm building protection mat yourself?

These mats are difficult to cut using a sturdy, sharp knife. Oiling the knife and bending open the mat parts that have already been cut makes the process easier. It is better and easier to use a pendulum jigsaw, but the cut edges are less smooth. Order the building protection mat 20 mm cheaply here online in the shop! You will receive the mat delivered as quickly as possible.